Fill
in the following boxes with as much information
as possible. It is not necessary to fill in
all boxes, but added detail will assist in
analyzing your situation more accurately.
1. System Service (Steam, Condensate, Cooling
Water, Lube Oil, etc.)
2.
Fluid Specific Gravity, SG at 60 F or 15 C
3.
Piping Material
4.
Piping Sizes, Schedules
5.
Reservoir / Head Tank height above Outlet
6.
Reservoir / Head Tank Operating Level (feet,
meters)
7.
Pump Types in System (Centrifugal, Positive
Displacement, Mixed Flow, No. of Stages)
8.
Pump Impeller Specific Speed
9.
Pump Design Inlet/Outlet Conditions (F, psig,
C, kpa)
10.
Pump Design Flow Rates (gpm, m3/hr)
11.
Pump NPSHR, (Net positive suction head required)
12.
Pump Motor Rating, (hp, NEMA size, kW, voltage,
amperage, No. phases)
13.
Actual Pump Motor Current Under Load (amperes)
14.
Pump Drive Turbine Design Inlet/Outlet conditions
15.
Actual Pump Drive Turbine 1st stage Inlet
and Outlet conditions (F, psig,)
16.
Piping System Operating Pressure/Temperatures
17.
Design Flow Rate and Head Losses or Pressure
Drop, (gpm, m3/hr, ft., psig, kpa, m)
18.
Actual Flow Rate and Head Losses or Pressure
Drop, (gpm, m3/hr, ft., psig, kpa, m)
19.
No. and Type of Valves in System (Gate, Globe,
Flow Control, Check)
20.
Piping Run Lengths (ft., meters)
21.
Height Difference from system Inlet to Outlet
22.
Piping Insulation, size, rating, type
Describe
System Malfunction along with any other
unusual symptoms or conditions (1000 Words
or less)
NOTE: Additional
Data can be sent to us via FAX or Courier
Delivery if required. Email jpeg photos
with the date of Inquiry and Nature of the
Problem in the Subject Block for our reference.
